Showing posts with label Yamaha. Show all posts
Showing posts with label Yamaha. Show all posts

Wednesday, December 1, 2010

Yamaha R6 & R1 Review ,Price,Picture,Feature

Yamaha R6 & R1 Review ,Price,Picture,Feature

Some owners have complained of a spongy front brake feel, which can be cured by fitting aftermarket brake lines. Others have bled the brakes to release trapped air every two years or so, which also helps cure the problem.

Like nearly all Yamahas, the R6 is relatively bulletproof when it comes to long-term reliability, though it's not unheard of for starters to give up the ghost, compromising other parts of the electrical system-namely batteries-if not replaced.

Around town, you could run the rpms as low as you as you want and the complete fuel injection will enable you to open the throttle anywhere, anytime without missing a beat. Of course, everything starts happening a lot quicker erst you pass 8,000 rpm and the bike pulls difficult till red line at this point but, for riding conservatively in traffic, the R6 causes a nice friend. The foot pegs are now 5mm more forward for greater weight distribution to the front end. They are surely high and the bars are low, however I found the overall ride package a lot comfier than I had thought.

You are not going to want to go touring on this thing, however don't despair if your favorite set of twisties are a couple hours away, the suspension isn't going to bushed you to death on the way. I did not maintain a lot of of an eye on gas mileage, other than getting the fuel light to come on at around 120 mph after some severe throttle abuse in the deserted canyons. This is 2000 rpm higher than the former R6 model and it is the highest redline of a widely distributed production four-stroke engine the Honda CBR250RR had a reputed redline of 19,000. Such a high speed is near to degrees known just in Formula One engines , where valve springs stress issues lead to the adoption of pneumatic return at further than 19,000 rpm.

Although total claimed horsepower of 152 hp at 10,500 rpm is only a couple of ponies up on the previous-generation bike (and still some 10 to 15 hp shy of the GSX-R), it's delivered in a much smoother, more user-friendly way than its carbureted counterpart. First impressions can be misleading: You might think the new bike has lost some of its punch. But that impression goes away when you realize just how much cornering speed you carried through that last balls-out sweeper leading to Catalunya's pit straight, or how deceptively hard the R1 accelerated out of the third-gear left leading into a long right climbing the paddock hill-a corner you'd need to take in second on most open-classers to get the kind of muscular drive the R1 delivers as second nature once its midrange chimes in at approximately 5000 rpm.

The completely revamped (but still unmistakably styled) fairing and bodywork offer a 20mm-wider nose section, which improves wind and weather protection to the rider's shoulders and head, the latter thanks to the reangled slant to the R1's snake-eye "face." But even with a wider fairing, the new R1 feels small and nimble; it remains a motorcycle you feel you can flick into a turn almost as easily as its YZF-R6 little brother. Except that now you feel much more a part of the bike, thanks in part to the revised riding position (clip-ons angled back and slanted downward, and footpegs moved back slightly), but also the narrower, resculpted fuel tank, which, at the cost of a one-liter (0.3 gallon) reduction in capacity, is much easier to snuggle up close to than its wider, bulkier predecessor. And though seat height remains the same, there's definitely less weight on your arms and shoulders, making the new R1 less tiring to ride.


Thursday, November 11, 2010

MODIFIKASI YAMAHA V-IXION 2009

MODIFIKASI YAMAHA V-IXION 2009

Modifier of this one is the most good if you were told to dismantle the motor. Moreover, the smell of racing style modification. not be overlooked anymore reputation. And indeed the average arable home modifications modif Automodified Lent (LA), this was predictable, the edges are always synonymous with style racing

Even so, Adhi 'Siwe' Wicaksono Danukusuma secretly crave with spirits streetfighter motorcycle. Armed with V-Ixion publication in 2009 owned Yuong Kurniawan which incidentally is the brother-in-law itself, the idealist project was soon released.

"Motor streetfighter tend to have a frightening impression. And I want to make a figure V-Ixion who tend to look emaciated to be more manly. It can be seen through the debris at the foot-leg and upper body. I hope this bike will be more visible from above as well as muscular down, "supreme leader appointed the LA garage, this Probolinggo.

"Waste moge have qualities that far above the product variations. In addition, in view of waste moge also more prestigious," said builder who again hobby of photography about the components of choice for the legs.

GSX600 arm mounting headache enough. "To be fitted with a normal and safe, we modify the framework of the sector. How to add 'meat' at arm's house. So, the house arm in order width each 3 cm to the left and right," he explained

Siwe also dismantle all-out body sector. Starting from deltabox, the trick to create one from fiberglass. Dimensions of course adjust the width of the swing-arm.

Likewise with the tank design that also made a little wild. "Let me add a frightening impression that I want to highlight," point out the open garage builder in the area of Jl. Soekarno-Hatta No.. 93, Probolinggo.

A perfect combination!

Streetfighter-style bikes usually also synonymous with added head lamp design and a model that has frightening. "Initially my thoughts to apply a small head lamp projector nan concise. But, on the way, seemed less match. Less comfortable with this projector head lamp," added artificial Ninja 250R.

After hunting on the internet, Siwe decided to pinch-owned Suzuki Hayabusa head lamp. If installed once wrote, would result is less interesting. So Siwe necessarily make shell made from fiber. Proffered design lines deliberately tailored to the new look.

Have a cool design, the shell is also inserted a small lamp sein. This indicates that Siwe also consider the element of safety riding.

DATA MODIFICATION

Front tire: 120/70-17 Michelin
Rear tire: 190/50-17 Michelin
Front rim: Yamaha R1 3.5 inches
Rear rim: 6.5-inch Yamaha R1
Airs next: Upside down Yamaha R1
Sok back: Suzuki GSX600
Head lamp: Hayabusa
Gear: Vortex
Muffler: Nobi



Thursday, November 4, 2010

MODIFIKASI Yamaha Mio 2009

MODIFIKASI Yamaha Mio 2009

Generally, low rider theme engine modifications typically performed with a classical style and color tend to be dark. But by Ferdy Fristyansjah even out the grip. Because of Yamaha Mio was actually appear more fresh and brought the airbrush patterned Spiderman

"If the classic style've typically seen. I'd like to skubek low rider is bright. Incidentally, I like the color blue and red are so typical of Spiderman. I'll look okay on the road, "said resident Jl. H. Batong III, West Cilandak, South Jakarta.

To realize all of that, Ferdy helped Rini and home modifications retainer Sutrisno F-16 at. HOS. Cokroaminoto, No. 16, Ciledug, Tangerang. Incidentally the place is also available variations of supporting Latin American-style motorcycle.

One character is implementation of the Z-bar handlebars custom models that plug in bracket product variations. For harmonization, the center of the handlebars equipped speedometer Yamaha Fino with the addition of ornaments two large headlights. So within that area too vacant baseball empty alias.

"Then the front foot by installation sokbreker adjustable upside down front variations. Just let me look features low rider, width and height adjust character sokbreker reset low rider bike today, "said Ferdy.

Nah gambot contrived to miss the front wheel by placing a round rubber Swallow brand 100/80-ring size 14 inches. Tires that fit aluminum rim combined with braided fingers tilted in the direction of tire rotation.

Then for the middle sector, Ferdy only rely on custom footrests which ends can be opened wider. And still on that part, seat cuted low model that is aligned with the back rest of the stirrup iron chromed.

On the back of the earrings back about 10 cm are also given proper. This time utilized by applying sepatbor tread rear tires sized 120/90-14 Swallow.

And that makes it very viscous mounts a typical low-rider, please refer to the model exhaust already installed. Discharge form was almost unanimous, aka half-circle, the most predominant form seen in the rear silencers. Sip really tuh exhaust.

DATA MODIFICATION

Winshild: Yamaha Fino
Kick starter: zero
Spion: Variations
Footstep: Wave
Caliper: KTC
Digital speedometer: TMG



Saturday, September 4, 2010

2011 Yamaha YZF-R1 Official Pictures

2011 Yamaha YZF-R1 Action2011 Yamaha YZF-R1 Action

2011 Yamaha YZF-R1 Black Series2011 Yamaha YZF-R1 Black Series

2011 Yamaha YZF-R1 Motorcycle2011 Yamaha YZF-R1 Motorcycle

2011 Yamaha YZF-R1 Black Red2011 Yamaha YZF-R1 Black Red2011 Yamaha YZF-R1 Black Red

2011 Yamaha YZF-R1 Sports Bike2011 Yamaha YZF-R1 Sports Bike

2011 Yamaha YZF-R1 Test Ride2011 Yamaha YZF-R1 Test Ride

Saturday, August 21, 2010

2011 Yamaha Fazer8 Motorcycles

2011 Yamaha Fazer8 Action View
2011 Yamaha Fazer8 Action View

2011 Yamaha Fazer8 Pictures
2011 Yamaha Fazer8 Pictures

2011 Yamaha Fazer8 Sports Bike
2011 Yamaha Fazer8 Sports Bike

2011 Yamaha Fazer8 Side View
2011 Yamaha Fazer8 Side View

2011 Yamaha Fazer8 Black Color
2011 Yamaha Fazer8 Black Color

2011 Yamaha Fazer8 Images
2011 Yamaha Fazer8 Images

2011 Yamaha Fazer8 Motorcycle
2011 Yamaha Fazer8 Motorcycle

2011 Yamaha Fazer8 Wallpaper
2011 Yamaha Fazer8 Wallpaper

2011 Yamaha FZ8 Pictures

2011 Yamaha FZ8 Official Pictures
2011 Yamaha FZ8 Official Pictures

2011 Yamaha FZ8 Sports Bike
2011 Yamaha FZ8 Sports Bike

2011 Yamaha FZ8 Photos
2011 Yamaha FZ8 Photos

2011 Yamaha FZ8 Side View
2011 Yamaha FZ8 Side View

2011 Yamaha FZ8 Black Color
2011 Yamaha FZ8 Black Color

2011 Yamaha FZ8 Images
2011 Yamaha FZ8 Images

2011 Yamaha FZ8 Motorcycle
2011 Yamaha FZ8 Motorcycle

2011 Yamaha FZ8 Wallpaper
2011 Yamaha FZ8 Wallpaper

Friday, May 7, 2010

I'd love to find a nice SR500 along these lines. Great stuff.


Yamaha YZF-R125

The YZF-R125 Yamaha Race Team Replica new features SupersPort Born from the DNA-R series, YZF-R125 has the R-series style and attitude. Its free-revving, four-stroke engine liquid cooled fuel injection is for near-instant throttle response, while the six-speed gearbox allows you to store it in the power band. Deltabox lightweight frame is connected with cast-aluminum swing arm provides class-leading handling. And, because it was full size, the R125 provides a comfortable riding position.

Technical Overview

Engine -
Engine type Liquid-cooled, four-stroke single cylinder, four-valve, SOHC
124.66 cc displacement
Bore x stroke 52.0 x 58.6 mm
Compression ratio 11.2: 1
Maximum power 11.0 kW (15 PS) @ 9000 rpm
Maximum torque 12.24 Nm (1.25 kg-m) @ 8000 rpm
Wet lubrication system that
Fuel System Fuel Injection
Clutch type Wet, multiple-disc coil spring
Ignition system TCI
Electric Starter System
Transmission system Constant mesh, 6-speed
Final Transmission Chain
Fuel tank capacity 13.8 L
Oil tank capacity 1.15 L

Chassis -
Chassis: Steel Deltabox
Telescopic fork front suspension system
Front travel 130 mm
Suspension rear suspension system (monocross)
Rear travel 125 mm
24.2 ° caster angle
Trail 86.1 mm
Single front disc brake, Ø 292 mm
Single rear disc brake, Ø 230 mm
Tires front 100/80-17 M / C
Tires rear 130/70-17 M / C

Dimensions -
Length 2015 mm
Width 660 mm
Height 970 mm
Seat height 818 mm
Wheel base 1355 mm
Minimum ground clearance 155 mm
138 kg wet weight

Tuesday, May 4, 2010

Reader Ride. Nice XT500.

My buddy Butch sent me some pics of his stable including this nice thumper.  I'd love to find one in this shape to park next to my DR650.

 

Monday, May 3, 2010

Yamaha Scorpio Z 2010

Machine
Engine type: 4 Step, SOHC Air Conditioners
Step Diameter: 70 mm x 58
Cylinder volume: 223 cm

The composition of Cylinders: Single Cylinder Upright
Comparison of Compression: 5.9: 1
Max Power: 19 ps / 8.000 rpm
Max torque: 1.86 kgf.m / 6.500 rpm
Lubrication system: -
Engine oil: -
Radiator: -
Carburetor: -
Slow rotation: -
Air filter: -
Transmission: 5 Speed (1-N-2-3-4-5)
Clutch: Manual
Caster / Trail: -
Dental Ratio: -
Starter System: Kick & Electric

Chassis
Frame Type: Double Cradle
Suspension Front
Rear Suspension: Monocross
Brakes Front: Double Disc Piston
Rear brakes: Tromol
Tires Front: 80/100-18-47 P
Rear tires: P 100/90-18-56

Electricity
Ignition system: DC-CDI

Dimension
Length x Width x Height: 2.020 x 770 x 1.090 mm
Seat Height: 770 mm
Distance between wheels: 1.295 mm
Distance to Land: 165 mm
Tank Capacity: 13.5 liters
Fill Weight:
Empty Weight: 125 Kg

Tuesday, April 27, 2010

Reader Ride! One hell of a custom Yamaha SR500!

Mike C sends in these pics of his stunning SR500 custom.  As a person who's been known to overbuild a few small CC bikes myself I really like this.

Mike includes his build sheet:

Here are some snaps of my 1978 Yamaha SR 500, hope you like them:
Front forks:'94 GSXR 750
Front 'fairing': Modified aftermarket fiberglass Yamaha R6 front fender
Headlights: Modified 18 wheeler back-up lights
Wheels: '94 Yamaha FZR600
Rear monoshock: '94 Yamaha RZ350
Muffler: Modified Toyoya Camry resonator (center section from a Harley, front section is a Kerker).
Oil cooler: Shop class project a buddy made for me
Front master cylinder & clutch lever: Honda CBR 900
Rear master cylinder: Honda CBR 600
Rear brake caliper: '94 Kawasaki ZX 750
Chin fairing: Home made fiberglass copy of RZ 350 part
Vapor catch tank: Modified reciever/dryer from Camry ac system
Kick starter: Yamaha XS 650
Tail piece: Fiberglass home-brew
Rear fender; Fiberglass home-brew
Gas cap: Yamaha YSR 50
Tailight; Marker light I 'borrowed' from a school bus
Seat is a cut down stocker using a upper shock mount at the rear
Speedo; Yamaha RZ 350
Mag cover: Kedo in Germany
Oil filter cover; Motolana Thailand
Cam chain adjuster cover; I forget the company name, but it came from New Zealand
Rear sets;Home-brew combo of the old buddy pegs from my '85 GSXR 750 and some nice alloy stock I found in a parking lot =-)
Bar end mirrors; Metal copies of some I found at a bicycle shop
Motor running early TT500 points type ignition & magnetto lighting
Voltage regulator from a snowmobile
Etc., Etc., Etc......
If you like, you can follow these links for more:
http://www.sr500forum.com/forum/viewtopic.php?f=15&t=415


http://www.sr500forum.com/forum/viewtopic.php?f=15&t=2185


Thanks for your time ......Mike C.


Great Stuff.  Thanks Much for the pics and info!